Representative image. Final geometry, finish and coating are confirmed from your drawing.
Reference · TO-BPF-410
410 nm Narrowband Filter
Filters
A narrowband interference filter for 410 nm selection, quoted from CWL, FWHM, peak transmission and blocking requirements.
Typical values
| Parameter | Reference |
|---|---|
| Reference CWL | 410 nm |
| Reference FWHM | 10 nm |
| Reference peak transmission | >85% |
| Reference blocking | OD4–OD6 outside passband |
| Reference diameter | 12.7 / 25.4 mm |
| Reference AOI | 0° |
| Substrate | Fused silica or glass; per drawing |
| Coating | Hard dielectric; per design |
This is a drawing-led item. The reference values below help frame the discussion; the pattern, groove or spectral data on your drawing controls the quotation.
Narrowband filters are defined by the full spectral requirement, not only the center wavelength. Provide the CWL, FWHM, peak transmission, blocking range and optical density, AOI and substrate. The values below are a reference RFQ target and are confirmed by the coating design.
- Fluorescence microscopy
- Laser filtering
- Optical sensing
- 410 nm reference CWL
- Custom FWHM and blocking
- Hard dielectric coating
- Mounted or unmounted
What to include in the RFQ
The following inputs let us quote the geometry, coating and inspection route without guessing.
Request a quote for this component- 01CWL, FWHM and peak transmission target
- 02Blocking range and required optical density
- 03AOI, polarization and cone angle
- 04Substrate, diameter and thickness
- 05Environmental and durability requirements
- 06Quantity
